Постановка задач исследования подачи сжатого воздуха на фрикционные поверхности тормозного механизма с учетом эффекта сопла Лаваля
Pourquoi ce travail est dans la base
Une base qui oublie comment elle a trouvé un travail ne peut pas être vérifiée. Voici les voies qui ont admis celui-ci.
Notice bibliographique
Résumé
For cooling of drum type brake assemblies of the timber-hauling machines, carryover of wear debris from a friction zone it was recommended to fan the compressed air on device’s frictional surfaces. It has been established that for increase of efficiency factor and stability coefficient of the brake assembly, the compressed air is required to be fan to a friction zone before braking process i.e. before brake shoes to adjoin to a brake drum. In this case, braking process will be with more pure frictional surfaces. It is experimentally established that air feed before braking process led to increase of braking force on an experimental wheel for 14 %. It was required to prove theoretically this result and to make mathematical model of process of the expiration of the compressed air on frictional surfaces. Authors paid attention that the gas expiration on frictional surfaces of the brake assembly behaves as the gas expiring from the Laval nozzle. Therefore in article process of air effluxion on surfaces of the brake assembly as process the gas expiration through the Laval nozzle is considered. The nozzle consists of frustum of cone couple interfaced by the narrow ends. Thus it is known that: at a subsonic speed of gas movement the nozzle is narrowed; at a supersonic speed of gas movement the nozzle extends; at gas movement of equal acoustic speed the area of a nozzle cross section reaches an extremum that is it has the narrowest section called the critical. According to this, the following conclusions were drawn: the compressed air which arrives on frictional surfaces of the brake assembly in the course of their operation from bringing unions, hypothetically behaves as gas which proceeds through the Laval nozzle; frictional surfaces cooling of the brake assembly in the course of braking, carryover of wear debris from a zone of friction, moisture and dirt, and also the balance of forces normal to frictional surfaces, probably, to consider according to the physical phenomen which are characteristic for the gas passing through the Laval nozzle and washing, in our case, frictional surfaces; for the analysis of course of this physical process it is required to execute its qualitative mathematical description and to carry out a number of the exact, difficult experiments proving its existence.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,005 | 0,002 |
| Méta-épidémiologie (sens strict) | 0,005 | 0,005 |
| Méta-épidémiologie (sens large) | 0,005 | 0,003 |
| Bibliométrie | 0,001 | 0,003 |
| Études des sciences et des technologies | 0,002 | 0,001 |
| Communication savante | 0,002 | 0,002 |
| Science ouverte | 0,005 | 0,002 |
| Intégrité de la recherche | 0,004 | 0,004 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,010 | 0,015 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découle