Static and Dynamic Wetability of Molten Al on Al2O3 and ZrO2 Substrates
Notice bibliographique
Résumé
In the fabrication of aluminum MMCs, the interface between metal and ceramic reinforcement may be associated with an oxide layer which plays a key role in the structure and properties of the MMC.This paper outlines some understanding into the breakdown of this oxide layer in aluminum and the corresponding contact between metal and reinforcement.The system under review consists of Al metal with 0 or 10%Mg alloy addition and Zr0 2 and A1 2 0 3 ceramic substrate material.It is shown that three conditions are required to destabilize the surface oxide on the aluminum: high temperature, alloying the melt and an atmosphere of nitrogen.This allows the melt to flow freely over the substrate resulting in regions of extensive reaction between melt and substrate and the formation of Al 3 Zr as one of the reaction products.It is also shown that impact of droplets on a ceramic substrate is not sufficient to break down the oxide layer on the droplets.These results highlight the need to develop controlled processing methodologies for the fabrication of MMCs with desired properties.Vol. 13, No. 1, 2006 with the metal-substrate bonding were explored with the aid of FACT 151.EXPERIMENTAL CONDITIONS Materials All of the ceramic substrates were tape cast then fired at the Westaim Labs.Density measurements using Archimedes principle showed that the A1 2 0 3 was approximately 94% dense while the Zr0 2 was fully dense.Under SEM examination, the substrate materials showed slight porosity at the surface of the Zr0 2 and throughout the cross section of A1 2 0 3 .With 94% of full densification the pores in the Al 2 03 were not interconnected.The substrates used for the static tests measured 0.025x0.025x0.001m; while the dimensions of substrates for the spray tests were 0.025 m diameter and 0.001 m thick.Commercial purity aluminum was used for some of the static tests.It contained about 98.4% Al and 1.14 % Fe and 0.43% Si.The aluminum used for the dynamic tests was 99.9%A1 granules.For the Al-Mg alloy used in both static and dynamic tests, industrial purity Mg was mixed with the 99.9% Al granules to prepare a Al-Mg alloy having 10% Mg.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction machine sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Le volet Gemma est une étiquette directe du modèle pour chaque travail de la base, lue sur la notice réduite au titre. Le volet Codex est un classifieur appris des 10 348 étiquettes directes de Codex et calibré sur les taux pondérés de l'échantillon; les champs sans appui suffisant ne portent aucun appel Codex. Le mode candidate est l'union des deux volets; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont pas des étiquettes humaines.
Scores du classifieur distillé par catégorie (deux têtes)
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,002 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule source (Gemma direct ou Codex distillé), pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».