Experimental Investigation of Wettability Alteration in Oil-Wet Reservoirs Containing Heavy Oil
Notice bibliographique
Résumé
Summary Solvent injection is an effective way to lower the viscosity of heavy oil and is considered when thermal techniques are not practically applicable. However, for the economic success of the method, large fractions of the injected solvent must be recovered. This requires further treatments of the reservoir, including water injection with chemicals to penetrate into the oil-wet matrix by changing the wettability. In this paper, we investigate the effect of wettability alteration of the oil-wet rock on solvent as well as oil recovery. Different wettability-alteration agents were tested, including cationic and anionic surfactants, ionic liquids, nanofluids, high-pH solutions, and low-salinity water. The potential of these materials to modify the wettability of aged sandstone and limestone samples was evaluated by use of imbibition tests. After conducting a total of 35 experiments, the most-promising wettability-alteration agents were identified to be anionic surfactants and high-pH solutions in addition to low-salinity water for the sandstone cases. Ion-pair interaction in sandstone and the dissolution of mixed-wet clay particles in carbonate are the main mechanisms of wettability alteration by those chemicals. Cationic surfactants and high-pH solutions were identified as the best wettability modifiers for the limestone samples. Although cationic surfactant changes the wettability by the ion-pair-interaction mechanism, the pH solution is believed to restore the water-wetness by decreasing the attraction forces between calcite and organic components. Ionic liquid at low concentration is able to alter the wettability of carbonate better than other conventional wettability modifiers. One important finding of this work is that solvent injection in heavy-oil-containing reservoirs is essential to condition the reservoir (i.e., to dilute the heavy oil before any wettability-alteration treatment can take place).
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,002 | 0,001 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,001 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».