Design, Microfabrication, and Characterization of Polar III-Nitride HFETs
Notice bibliographique
Résumé
ABSTRACT \nDesign, Microfabrication, and Characterization of Polar III-Nitride HFETs \nAlireza Loghmany, Ph.D. \nConcordia University, 2016 \nWith excellent performance in high-frequency power amplifiers, AlGaN/GaN heterojunction field-effect transistors (HFETs) as next generation power amplifiers have drawn a great deal of attention in the last decade. These HFETs, however, are still quite limited by their inherently depletion-mode (D-mode: negative pinch-off voltage) nature, relatively poor gate-leakage, and questionable long-terms reliability. In addition, since AlGaN/GaN HFETs operate at extremely high-power densities, performance of these devices has so far remained quite limited by self-heating effects. \nWhile a number of techniques have already been developed for realization of enhancement-mode (E-mode: positive pinch-off voltage) AlGaN/GaN HFETs, these techniques in addition to having a number of difficulties in achieving enhancement-/depletion-mode pairs, fall short of satisfying requirements such as low leakage-current, drain-current stability, and pinch-off voltage stability at the high operating temperatures and at elevated electric-fields. Among these techniques, fluoride-based plasma treatment is the most widely accepted. As an alternative to this mainstream technique, polarization-engineering of AlGaN/GaN HFETs through exploring the impacts of the mesa geometry is studied as a possible avenue for selective transformation of the D-mode nature of AlGaN/GaN HFETs to an E-mode character. Whereas limited experimental studies on the pinch-off voltage of HFETs realized on different isolation-feature geometries have indicated the presence of a certain correlation between the two, such observations lack the required depth to accurately identify the true culprit. This technique is expected to be ultimately capable of producing enhancement-/depletion-mode pairs without adding any extra steps to the microfabrication process. \nIn light of this requirement, microfabrication of AlGaN/GaN HFETs using a number of alternative isolation-feature geometries is explored in this study. In addition to developing an in-house microfabrication process, transistors designed according to these novel isolation-feature geometries have been fabricated through the services offered by Canadian Microelectronics Corporation (CMC). Investigation of the variation of pinch-off voltage among the devices fabricated through this latter means has conclusively indicated that the pinch-off voltage shift, rather than exclusively being caused by the surrounding-field effect, is also correlated to the perimeter-to-area ratio of the isolation-features. \nIn addition, through characterization and thermal modeling of these groups of devices, in this study a new approach is unveiled for reducing self-heating in AlGaN/GaN HFETs. According to finite element analysis (FEA) and electrical measurement of average channel temperature, an improved heat-dissipation was observed in HFETs enjoying a more distributed nature of the two-dimensional electron gas (2DEG) channel. This is observed to be the case especially for isolation features which offered the center of the channel a smaller distance to the side walls. Observations also indicate a more distinct gain in thermal management with reduction of the gate-length and also the surface area of the isolation pattern. Results suggest that self-heating in AlGaN/GaN HFETs can be substantially nullified by reducing the island-width below a certain threshold value, while maintaining the total width of the transistor constant. \nIn addition to exploring these alternatives on AlGaN/GaN HFET structures, in-house microfabrication of AlN/GaN MISFETs is also studied. The results of DC characterization of these novel transistors are also presented.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,001 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».