Design, Microfabrication, and Characterization of Polar III-Nitride HFETs
Bibliographic record
Abstract
ABSTRACT \nDesign, Microfabrication, and Characterization of Polar III-Nitride HFETs \nAlireza Loghmany, Ph.D. \nConcordia University, 2016 \nWith excellent performance in high-frequency power amplifiers, AlGaN/GaN heterojunction field-effect transistors (HFETs) as next generation power amplifiers have drawn a great deal of attention in the last decade. These HFETs, however, are still quite limited by their inherently depletion-mode (D-mode: negative pinch-off voltage) nature, relatively poor gate-leakage, and questionable long-terms reliability. In addition, since AlGaN/GaN HFETs operate at extremely high-power densities, performance of these devices has so far remained quite limited by self-heating effects. \nWhile a number of techniques have already been developed for realization of enhancement-mode (E-mode: positive pinch-off voltage) AlGaN/GaN HFETs, these techniques in addition to having a number of difficulties in achieving enhancement-/depletion-mode pairs, fall short of satisfying requirements such as low leakage-current, drain-current stability, and pinch-off voltage stability at the high operating temperatures and at elevated electric-fields. Among these techniques, fluoride-based plasma treatment is the most widely accepted. As an alternative to this mainstream technique, polarization-engineering of AlGaN/GaN HFETs through exploring the impacts of the mesa geometry is studied as a possible avenue for selective transformation of the D-mode nature of AlGaN/GaN HFETs to an E-mode character. Whereas limited experimental studies on the pinch-off voltage of HFETs realized on different isolation-feature geometries have indicated the presence of a certain correlation between the two, such observations lack the required depth to accurately identify the true culprit. This technique is expected to be ultimately capable of producing enhancement-/depletion-mode pairs without adding any extra steps to the microfabrication process. \nIn light of this requirement, microfabrication of AlGaN/GaN HFETs using a number of alternative isolation-feature geometries is explored in this study. In addition to developing an in-house microfabrication process, transistors designed according to these novel isolation-feature geometries have been fabricated through the services offered by Canadian Microelectronics Corporation (CMC). Investigation of the variation of pinch-off voltage among the devices fabricated through this latter means has conclusively indicated that the pinch-off voltage shift, rather than exclusively being caused by the surrounding-field effect, is also correlated to the perimeter-to-area ratio of the isolation-features. \nIn addition, through characterization and thermal modeling of these groups of devices, in this study a new approach is unveiled for reducing self-heating in AlGaN/GaN HFETs. According to finite element analysis (FEA) and electrical measurement of average channel temperature, an improved heat-dissipation was observed in HFETs enjoying a more distributed nature of the two-dimensional electron gas (2DEG) channel. This is observed to be the case especially for isolation features which offered the center of the channel a smaller distance to the side walls. Observations also indicate a more distinct gain in thermal management with reduction of the gate-length and also the surface area of the isolation pattern. Results suggest that self-heating in AlGaN/GaN HFETs can be substantially nullified by reducing the island-width below a certain threshold value, while maintaining the total width of the transistor constant. \nIn addition to exploring these alternatives on AlGaN/GaN HFET structures, in-house microfabrication of AlN/GaN MISFETs is also studied. The results of DC characterization of these novel transistors are also presented.
Fetched live from OpenAlex and de-inverted. Abstracts are not stored in this database: the inverted indexes are 8.6 GB of the frame’s 9.3 GB of text, and the host has 13 GB free.
How this classification was reachedexpand
Full frame machine prediction
Teacher imitationNot calibrated prevalence, not ground truth. Human validation pending. The Gemma side is a direct model label for every work in the frame, read from the title-only record. The Codex side is a classifier learned from the 10,348 direct Codex labels and calibrated to design-weighted sample rates; fields without enough sample support carry no Codex call. Candidate is the union of the two sides; consensus is their intersection. These outputs are machine_predicted_unvalidated and are not human labels.
Distilled classifier scores by category (both heads)
| Category | Codex | Gemma |
|---|---|---|
| Metaresearch | 0.000 | 0.000 |
| Meta-epidemiology (narrow) | 0.000 | 0.000 |
| Meta-epidemiology (broad) | 0.000 | 0.000 |
| Bibliometrics | 0.000 | 0.000 |
| Science and technology studies | 0.000 | 0.000 |
| Scholarly communication | 0.000 | 0.000 |
| Open science | 0.000 | 0.000 |
| Research integrity | 0.000 | 0.000 |
| Insufficient payload (model declined to judge) | 0.001 | 0.000 |
Machine scores (provisional)
The two teacher heads of the student model, read on this work. A score orders the frame for review; it never asserts a category, and the validation status ships verbatim with every row.
Baseline scores from an immature model (maturity gate not passed, 7 training rounds). Scores rank; they never assert a category.
score_only:v0-immature-baseline · verbatim from the scoring run: score_only means the number may rank works, and no category label ships from itClassification
machine, unvalidatedMachine predicted; a candidate call from one source (direct Gemma or distilled Codex), not a consensus.
How this classification was reached, model by model and score by score, is at the end of the page under "How this classification was reached".