Properties of Mixing SAC Solder Alloys with Bismuth-Containing Solder Alloys for a Low Reflow Temperature Process
Pourquoi ce travail est dans la base
Une base qui oublie comment elle a trouvé un travail ne peut pas être vérifiée. Voici les voies qui ont admis celui-ci.
Notice bibliographique
Résumé
ABSTRACT The subject of extensive research has been the establishing of lower temperature soldering of electronic assemblies that are similar to the once common yet still preferred eutectic Tin-Lead (SnPb) soldering processes that are below 217°C. This research measured and compared the mixing mechanisms of paste and ball dissolution. Mixed soldered assemblies will have different dissolution results that are dependent on the peak refl ow temperature. The hypothesis for this experiment was to determine the relationship of various times above the melting point of low temperature solders containing Bismuth. The results measured are from solder joints of both SAC305 and Bismuth containing solders formed at lower process temperatures compared to the standard high temperatures which peak at 230°C-260°C. The Bismuth containing solders evaluated start with the highest to lowest weight percentage of Bismuth, the eutectic 58Bismuth/42Tin (58Bi/42Sn), 57Bi/42Sn/1Ag and a propriety alloy that has a lower Bismuth content along with various micro alloys, defi ned as 40-58Bi/Sn/X (X representing proprietary micro alloys or doping). The assembly was with an 18mil 96.5Tin/3.0Silver/0.5Copper (SAC305) solder ball mixed with each solder paste. These solder alloys were exposed to three different peak temperatures 180°C, 195°C, 205°C. Another refl ow profi le attribute of focus was times above 138°C - the melting point of the eutectic Sn58Bi alloy, this term used throughout the study is referred to Time Above Melting (TAM). The ball and paste assembly used the times above melting of 120sec and 240sec to represent process extremes and verify their signifi cance on improving mixing level results. The average mixing % levels were recorded and compared for each solder joint combination to test the theory that the solder paste solidifi es during the time above melting (TAM) within the refl ow oven. [1] This experiment effectively demonstrates that the refl ow profi le parameter for time above melting has limited effectiveness in additionally mixing the paste with the BGA solder ball. Optimization of mixing percentages will need to be achieved by optimizing the paste and ball volumes.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,001 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,001 | 0,000 |
| Bibliométrie | 0,001 | 0,001 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,001 | 0,000 |
| Intégrité de la recherche | 0,001 | 0,001 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découle