Low-Temperature Bitumen Recovery from Oil-Sand Reservoirs Using Ionic Liquids
Notice bibliographique
Résumé
Summary Steam injection is widely used for bitumen recovery. However, steam is not efficient for shallow or thin reservoirs because of heat loss in the wellbore or to surrounding formations. Numerous alternatives have been proposed, including the addition of solvents and replacement of steam with volatile solvents. Here, we describe a new technology that combines nonvolatile ionic liquids (ILs) and waterflooding for bitumen recovery that can deliver high recovery at ambient temperature. Different ILs were designed for complete dispersal/dissolution of bitumen at ambient temperature. The designed ILs were tested in coreflood experiments with high–grade oil–sand ore from Alberta. Two different scenarios were tested: continuous injection of ILs at different injection rates and injection of a slug of ILs followed by water injection. Different slug volumes were tested at a constant injection rate. After ILs injection, the oil sand was removed from the column, and the remaining bitumen was quantified using a modified Dean–Stark method. Viscosity and solid–content measurements of the recovered samples at breakthrough were conducted. Bitumen recovery by the designed ILs can be thought of as a solution mining process. Tuning the physical and chemical properties of the ILs is the most important aspect of achieving the desired interaction with the oil–sand system. Properties of the designed IL depend on the selected cation and anion, and the strength of their intermolecular interaction. Primary amines mixed with the oleic acid chosen for IL1 form a viscous IL that can recover bitumen, leaving a slight amount of bitumen behind, but a large pressure gradient. Changing the cation to tertiary amines produces significantly less–viscous ILs, which completely recover the bitumen in the oil–sand column. Moreover, the cation can be tailored to significantly minimize the fines (clay) migration and viscosity of the recovered bitumen and to provide compatibility with an aqueous phase. In all cases, these recoveries are significant, compared with the currently used technologies. This work proves that bitumen recovery from oil sand is possible at low temperatures by means of a process analogous to solution mining with the design of the proper ILs, in contrast to viscosity–reduction processes achieved by thermal methods. The properties of these ILs can be tuned for different recovery mechanisms. Thus, this work establishes the basis for developing a new class of in–situ recovery processes with high recovery efficiencies and low environmental impact.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,001 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,001 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,001 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».