New Insights on the Impact of High Temperature Conditions (176°C) on Carbonate and Sulphate Scale Dissolver Performance
Notice bibliographique
Résumé
Abstract Scale-dissolver technology has been developed and applied with varying degrees of success over the past few years to remove carbonate and the more challenging sulphate/sulphide scales from production tubing and process equipment. It can often seem a much safer, more cost-effective remediation approach than physical removal, in particular, in the new generation of HP/HT fields, where any physical well intervention carries high risk, while the high temperatures would normally be beneficial in enhancing scale solubility and dissolution rate. The current paper reports dissolution characterstics of three solvents for calcite, barite, celestite and anhydrite in the temperature range 85°C to 176° to verify their performance up to the very high temperatures of a specific HP/HT development. These solvents included a typical alkaline-pH chelant for sulphate scale, an organic-acid mixture for carbonate scales, and a novel neutral-pH chelant as a less corrosive solvent for carbonate scale removal. In some tests the liquid-to-solid ratiowasvaried to evaluate the impact of excess scale on solvent performance. The performance against BaSO4 of the alkaline-pH chelant unexpectedly declines very significantly at 176°C relative to that observed at 85°C. Thermal instability was ruled out as the cause becausethe solvent showed very limited decline in performance when tested at 85°C after it had been thermally aged at 176°C. Performance at 176°C showed an initial rise followed by a decreasein aqueous barium ions, strongly indicating secondary re-precipitation of a barium-containing species at this temperature. In contrast, dissolution rates of carbonate scale by organic acid were greaterat the higher temperature, as would be expected. The novel neutral chelant showed a decline in calcite dissolution performance during the 176°C test but unlike the alkaline-pH chelant used for sulphate scale, this chelant showed degradation after thermal ageing and re-testing at 85°C. The findings from this paper suggest that there is temperature limit above which effective removal of sulphate scales may not be feasible with the selected solvents due to re-precipitation of a secondary reaction product, while for carbonate removal the current neutral chelants tested have a thermal stability issue at 176°C. These findings need to be considered when evaluating the potential role of chemical remediation in the overall scale-control strategy for HP/HT fields.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,001 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».