<scp>CFD‐DEM</scp> analysis of the spouted fluidized bed with non‐spherical particles
Notice bibliographique
Résumé
Abstract Hydrodynamics of spouted fluidized beds of spherical and elongated sphero‐cylindrical particles with an aspect ratio (AR) of 4 were studied by the CFD‐DEM technique. The multi‐sphere method was adopted to present the sphero‐cylindrical particles. Simulations were validated with the experimental data for both particle types. Bubble equivalent diameter, bubble shape factor, and leakage fraction were obtained in the simulations. Time‐averaged particle velocity and porosity profiles, solids circulation rate, particle exchange distribution at the spout‐annulus interface, were investigated in the beds filled with spherical and sphero‐cylindrical particles at gas mass flow rates of 0.005, 0.007, and 0.009 kg/s. The equivalent bubble diameter was found to be lower for spherical particles compared to sphero‐cylindrical particles. The leakage fraction of the bubble was lower for sphero‐cylindrical particles. Solid circulation rate and spout diameter were larger for the bed of spherical particles. A higher probability of particles transition into the spout was observed for spherical particles. Investigating the orientation showed that sphero‐cylindrical particles tend to orient almost vertically against the gas flow in the spout region, which lowers the exerted drag force, whereas the particles align nearly horizontally in the annulus region. The results revealed that the CFD‐DEM approach is a promising method for investigating the fluid and both spherical and non‐spherical particle behaviours in spouted fluidized beds.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,001 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».