Effect of fiber length and treatments on the hygroscopic properties of milkweed fibers for superabsorbent applications
Pourquoi ce travail est dans la base
Une base qui oublie comment elle a trouvé un travail ne peut pas être vérifiée. Voici les voies qui ont admis celui-ci.
Notice bibliographique
Résumé
This study investigated the influence of pre-treatment methods and size distribution on the hygroscopic properties of milkweed fibers (MW). Pre-treatment methods included hydrothermal treatment and hybrid treatment, which involves the hydrothermal treatment followed by the alkaline treatment. Scanning electron microscope (SEM), Fourier transform infrared (FTIR), and X-ray diffraction (XRD) were used to investigate the effect of pre-treatments on morphology, chemical composition, and crystallinity of milkweed fibers, respectively. Brunauer–Emmett–Teller (BET) surface area analysis was also used to measure the surface area of milkweed fibers after each pre-treatment. The results revealed that only after 5 min of stirring, hydrothermal treatment and hybrid treatment enhanced the water absorption capacity of non-treated MW fibers from 18 ± 4 g/g to 54 ± 4 g/g and 50 ± 1 g/g, respectively. The SEM and FTIR confirmed the removal of waxes from the surface of milkweed fibers after applying hydrothermal treatment without causing any changes to the hollow structure of fibers. Hydrothermal treatment improved hydrophilicity and hence better hygroscopic characteristics of MW fibers, as evidenced by increased absorption capacity and better water retention property. The hybrid treatment, on the other hand, caused the hollow structure of MW fibers to collapse completely, and left holes on the surface. As confirmed by FTIR and XRD, this occurred because of the dissolution of lignin and hemicellulose. As a result of these severe morphological alterations, the hybrid treated MW fibers showed inferior water retention properties compared to the hydrothermally treated sample. Further, it was observed that MW fibers with larger size distribution exhibited higher water absorption capacity and better water retention properties compared to the smaller fibers. Therefore, it can be concluded that hydrothermal treatment can improve the hydrophilicity of MW fibers and pave the way for their application as superabsorbent materials in a simple and cost-effective manner.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découle