Temperature and Aging Effects on the Rheological Properties and Performance of Geopolymer-Modified Asphalt Binder and Mixtures
Pourquoi ce travail est dans la base
Une base qui oublie comment elle a trouvé un travail ne peut pas être vérifiée. Voici les voies qui ont admis celui-ci.
Notice bibliographique
Résumé
Using geopolymer as a modifier for asphalt binders and mixtures gained momentum for investigation in recent decades. Limited research investigations attempted to link the effect of temperature and traffic loading on the rheological properties and performance of geopolymer-modified asphalt binders. The primary objective of this study is to evaluate the effect of fly ash-based geopolymer (GF), styrene-butadiene-styrene (SBS), and the combination of GF with SBS on the rheological properties and performance of asphalt binders at low and intermediate temperatures. The rheological properties and performance of neat and modified asphalt binders (4%GF, 8%GF,12%GF, 2%SBS, and hybrid (2%SBS+8%GF)) were evaluated utilizing dynamic shear rheometer (DSR) and bending beam rheometer (BBR) devices. To evaluate the fatigue resistance of asphalt binders, the linear amplitude sweep (LAS) and viscoelastic continuum damage (VECD) models were applied. The dynamic or complex modulus and moisture damage resistance were measured to investigate the influence of modifiers on the performance of asphalt mixtures. The findings demonstrated that for both unaged and RTFO-aged asphalt binders, additives reduced the temperature sensitivity of both G' and G″. When the binders were exposed to long-term aging using a pressure aging vessel (PAV), it was noticed that the 8%GF binder became more susceptible to temperature changes. The 2%SBS binder had the lowest creep stiffness compared with the neat and other modifiers, while the hybrid binder exhibited the highest resistance to fatigue distress at different temperatures compared with the other binders. The modified asphalt mixes (8%GF, 2%SBS, and hybrid) achieved the maximum tensile strength (St) compared with the neat asphalt binder, with an increase of more than 80%. The St increased from 580.4 kPa to 740.4 kPa, 884.8 kPa, and 917.4 kPa by utilising the 8%GF, 2%SBS, and hybrid binders, respectively. Furthermore, the modified asphalt mixture exhibited more ability to resist cracking, attaining the highest fracture energy in dry and freeze-thaw conditions.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découle