Removal of Fe and Mn from Co leach solutions by adsorption on activated carbon based on post-consumer polyethylene terephthalate (PET) - Mechanism insights through linear and nonlinear isotherm and kinetic models
Pourquoi ce travail est dans la base
Une base qui oublie comment elle a trouvé un travail ne peut pas être vérifiée. Voici les voies qui ont admis celui-ci.
Notice bibliographique
Résumé
The removal of Fe2+ and Mn2+ from cobalt sulfate-saturated solutions is frequently problematic for Cu-Co hydrometallurgical process performance. Among the applied and developed methods for the removal of these metals, adsorption has drawn less attention. This study investigates on the removal of Fe2+ and Mn2+ in industrial cobalt solutions known as raffinates by adsorption on activated carbon prepared from post-consumer polyethylene terephthalate (PET). The adsorption operating conditions were studied in synthetic solutions and industrial solutions. The Langmuir, Freundlich, and Temkin isotherms were then used to fit the adsorption data, while the pseudo-first-order (PFO), pseudo-second-order (PSO), and Elovich models were used to describe the kinetics. Linear and nonlinear kinetic and isotherm models were studied and compared. Furthermore, intraparticle diffusion (IPD) models were used to study the transfer mass mechanism. The results show that Fe2+ and Mn2+ are removed from Co solutions with the efficiencies of 62.14 and 68.43, respectively. The Langmuir model fits the Fe2+ and Mn2+ adsorption data better, indicating that chemisorption is preferred over physisorption, whereas the Freundlich model fits the Co2+ adsorption data better, indicating that physisorption is preferred over chemisorption. The PFO model describes well the kinetic behavior of Fe2+ and Mn2+, whereas the Elovich model describes better the kinetic behavior of Co2+. According to the IPD model, the step that limits the adsorption of Fe2+, Mn2+, and Co2+ is essentially diffusion through the activated carbon pores. The reported experimental results will highlight the use of activated carbon in the removal of Fe2+ and Mn2+ in Cu and Co hydrometallurgy.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découle