Viaduct Foundation Design for Geohazards in Kicking Horse Canyon
Notice bibliographique
Résumé
The Trans-Canada Highway passes through very steep terrain in the Kicking Horse Canyon east of Golden, BC, and a series of recent projects have improved and widened the highway through the region. Construction of the final and most technically challenging segment is now underway with the Kicking Horse Canyon Phase 4 design build project. The existing highway crosses a series of unstable slopes, active landslides, large ravines, and avalanche and rockfall paths. Key project goals were to improve the safety of the roadway and reduce geohazard risk. The required highway geometry combined with upslope geohazards and steep terrain required significant portion of the alignment to be constructed on the steep slopes below the existing highway which have marginal stability. The conventional solution for construction on steep slopes below the highway has been to support the highway on grade with downslope retaining walls, which are stabilized by piles below. When considering this option following completion of the geotechnical investigation for detailed design, it became apparent that due to a number of factors, including higher walls and deeper bedrock than expected, large diameter piles at very tight spacing would be required to meet project specifications for slope stability. These piles would be costly, time consuming to install, and there would be significant safety challenges associated with the heavy piling equipment required on the steep slopes for long durations. A bridge solution was therefore proposed to carry the roadway on structure over the unstable slopes. An innovative viaduct design was developed and was adopted for nine individual viaduct structures totaling over 1.8 km of highway length. The viaducts have regular 23 m spans with substructures consisting of precast concrete cap beams at each pier supported on three concrete-filled steel pipe piles drilled into bedrock. The highway is supported on the structures, and the piers were designed to resist the loading from slope movements, thus avoiding the need to stabilize the entire slope. There are no established design methodologies in geotechnical practice for design of piles embedded in a moving embankment, other than in seismic design for liquefiable soils. New methodologies were developed drawing on first principles and existing stabilization pile methodologies. Close coordination was required between the structural and geotechnical engineers to find solutions for a variety of different loading situations, ground slopes and below-ground bedrock surfaces, and an active landslide zone that was actively moving during construction. Other extreme loadings were also required to be defined and designed for including debris flow, rockfall, and avalanche impacts. This paper discusses the many design, loading, and constructability challenges faced in the foundation designs.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».