The role of fine particles in the stability of emulsion in the naphthenic froth treatment (NFT) process
Notice bibliographique
Résumé
This study investigates the role of fine particles in stabilizing emulsion in the naphthenic froth treatment (NFT) process. The characterization results of different types of solids collected from the diluted bitumen froth indicate that kaolinite is the dominant clay mineral in the composition of NFT solids. There were differences in the mineralogy of the fine samples depending on the phase (carrier fluid) from which the samples were collected. FTIR analysis shows that the fines that remain in the diluted bitumen even after several hours of sample retention time are mainly kaolinite, though the presence of other minerals such as siderite is very likely. Moreover, the presence of organic functional groups on the surface of the particles is confirmed for all types of solids in the FTIR analysis, regardless of the washing and drying procedures employed. Inspection of the different layers of the diluted bitumen via micrography and measurement of the solids concentration shows higher fine content and smaller particles in the top layer, a dire situation for destabilizing the emulsion in the top layer, supported by the observation that the water droplets in this layer are tiny. Solid partitioning tests revealed the solid particles migrate to the interfacial region and the aqueous phase. The concentration of particles increased in the interfacial region with the presence of asphaltene in the oil phase (dominant effect) and the increased polarity of the oil. The wettability measurements show that without the coverage of solid particles with organics (asphaltene-resin molecules), the fine particles are extremely hydrophilic. The adsorption of asphaltene-resin matter on the fine particles increased the hydrophobicity of the fines, a situation that promotes the partitioning of the fine particles at the interfacial region and the stability of the droplets. It was observed that the contact angle increased with the decreasing polarity of the oil phase. In the interfacial tension measurements, the fine solids with minimal asphaltic matter coverage did not remain suspended in the oil phase and either sedimented rapidly or migrated to the air-oil interface, unlike the organics-covered solids which remained immersed in oil. No decrease in the interfacial tension was recorded for the water-oil systems in the presence of fine solids. Interfacial rheology measurements illustrate the viscoelastic behavior of the interfacial film at lower frequencies and higher fine particle concentrations. We conclude that if not for the interaction between the asphaltic matter and the fine particles, the emulsion stability by fine particles would have been very unlikely.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction machine sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Le volet Gemma est une étiquette directe du modèle pour chaque travail de la base, lue sur la notice réduite au titre. Le volet Codex est un classifieur appris des 10 348 étiquettes directes de Codex et calibré sur les taux pondérés de l'échantillon; les champs sans appui suffisant ne portent aucun appel Codex. Le mode candidate est l'union des deux volets; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont pas des étiquettes humaines.
Scores du classifieur distillé par catégorie (deux têtes)
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,001 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule source (Gemma direct ou Codex distillé), pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».