Geotechnical Performance of Alkali-Activated Uncalcined Clayey Soils with Hydroxide- and Aluminate-Based Activators
Pourquoi ce travail est dans la base
Une base qui oublie comment elle a trouvé un travail ne peut pas être vérifiée. Voici les voies qui ont admis celui-ci.
Notice bibliographique
Résumé
This research evaluates the performance of two low- and high-plasticity clays as the sole precursors to develop alkaline activation at ambient temperature. NaOH solutions with different concentrations of 2 to 10 mol/L along with binary solutions with NaAlO2/NaOH mass ratios of 1 and 0.75 for CL and CH clays, respectively, have been used as alkaline activators. Unconfined compressive strength (UCS), indirect tensile strength (ITS), ultrasonic pulse velocity (UPV) and Atterberg limits tests have all been conducted to thoroughly assess the geotechnical properties of alkali-activated clays. The experimental results show that CL with the best performance when mixed with 8 M NaOH activator renders higher mechanical strength and stiffness compared to CH showing a peak at 4 M NaOH. This observation is primarily attributed to the higher amorphous content and a weak interlayer force in CL that in turn contributes to more reactive silicate phases and gel products. Moreover, binary solution considerably enhances the mechanical performance of parent clays by modifying the Si/Al ratio in the mixture. Another important observation is the vulnerability of the alkali-activated clays to cracks and expansion due to alkali–silica reactions, leading to a significant drop in their mechanical strength and stiffness. Microstructural analyses also reveal the increase in amorphous content and the formation of flocculated particles covered by aluminosilicate gels, especially in CL-based samples where the layer-like structure of clay changes to sponge-like with globular units. More importantly, uncalcined clay-based samples are observed to be prone to the curing time-dependent cracking associated with expanding phases due to alkali–silica reactions or flocculated particles. These observations could be useful in geotechnical engineering practice for a variety of field applications in terms of both safety and performance because not only natural clays have been used as the sole precursors but also a relatively low alkali concentration has contributed to the optimum improvement of the composite material.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,001 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découle