Exploring Platinum Thin Films as Electrodes for High‐Temperature and ‐Pressure Electrochemical Studies in Aqueous Systems
Notice bibliographique
Résumé
ABSTRACT This work reports a methodology for the fabrication of Pt thin‐film electrodes for electrochemical studies in hydrothermal systems. The research process was meticulous, with particular attention paid to the multilayer Ti/Pt/Ti/Al 2 O 3 film structure and annealing conditions that are expected to impact the morphology of the films, surface composition and electrochemical response. The findings of this study are significant, as they provide valuable insights into the behaviour of Pt thin‐film electrodes in various media and conditions. Two different approaches were adopted for the preparation of the electrodes: in one case, the Ti/Pt/Ti/Al 2 O 3 films deposited on sapphire wafers were exposed to rapid thermal annealing at 900°C under argon for 5 min, followed by argon ion milling to etch the final electrode pattern (Pt‐RA(900)), while in the other case, uncapped Pt films were annealed, after etching, in a tubular oven under argon at specific temperatures between 200°C and 900°C (Pt‐TO). Rapid annealing at 900°C on capped films resulted in the formation of a Pt 3 Ti intermetallic alloy with remarkable mechanical and chemical stability even after 10 h of immersion in deionised water, acid (0.1 M H 2 SO 4 ) and alkaline media (0.1 M KOH) conditions at temperatures up to 150°C, despite the dissolution of the Al 2 O 3 top layer at 150°C and long immersion times (> 10 h). In the case of uncapped Pt films, diffusion and oxidation of Ti through the Pt film at high temperature resulted in the formation of TiO 2 on the surface of Pt. The results were confirmed by using a comprehensive suite of ex‐situ characterisation techniques to follow changes in the Pt electrode surface morphology and composition before and after immersion in H 2 O, 0.1 M H 2 SO 4 and 0.1 M KOH solutions under argon. Ex‐situ electrochemical characterisation studies were also conducted to correlate the changes in the electrode surface properties, including the electrochemical surface area, with different annealing conditions and after various hydrothermal treatments in neutral, alkaline and acidic media.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,001 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,001 | 0,000 |
| Bibliométrie | 0,000 | 0,002 |
| Études des sciences et des technologies | 0,000 | 0,001 |
| Communication savante | 0,000 | 0,001 |
| Science ouverte | 0,001 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,001 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».