Bio-Oil Upgrading: Impact of Phenol on Acetic Acid Esterification with Amberlyst-15
Notice bibliographique
Résumé
Bio-oil is a complex organic liquid mixture generally derived from biomass pyrolysis that has potential as a sustainable fuel. Its low energy density, corrosiveness, and low stability, however, limit its use. Upgrading technologies such as the esterification of acids can be used, but the impact of the other bio-oil constituents, including phenolic compounds, on this reaction is not well understood. Thus, this work assessed the effect of phenol on the conversion of acetic acid with methanol over Amberlyst-15. At 80 °C and a methanol:acetic acid ratio of 1.6:1 (w/w), the esterification reaction happens without a catalyst in solution. The conversion was the same with or without phenol, reaching 27% after 4 h. In the presence of the solid-acid catalyst, the conversion increased to 90% over the same time. With the addition of phenol in the range of 0.06 to 0.33 (phenol-to-acetic acid mass ratio), the acid conversion decreased by 8%, while a higher ratio (0.60 w/w) had no impact on the conversion, because this higher concentration of phenol could have accelerated the regeneration of acid sites on the Amberlyst-15. A pseudo-first-order reaction in acetic acid was fit to the data and suggested that the addition of phenol did not alter the reaction mechanism. Diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) revealed that phenol and acetic acid adsorb on the same sites of the Amberlyst-15 structure, but acetic acid adsorbs more strongly, which explained the decrease in the catalyst performance. X-ray photoelectron spectroscopy (XPS) confirmed catalyst surface modifications due to phenol interference. The results showed the formation of noncovalent interactions between phenol and the vinylbenzene sulfonated structure of Amberlyst-15, as well as H···π interactions under distinct environments. Overall, this study highlighted the inhibitory effects of phenol at concentrations lower than 0.60 w/w on solid-acid catalysts, providing insights for upgrading processes.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction distillée sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Apprise à partir de 10 348 étiquettes directes de Codex et de 10 348 étiquettes directes de Gemma. Le mode candidate est l'union des têtes enseignantes seuillées; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont ni des étiquettes humaines ni des étiquettes directes de modèles de pointe.
Scores Codex et Gemma par catégorie
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,000 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,000 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule tête enseignante, pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».