Influence of bainitic transformation temperature on microstructure evolution during isothermal holding and subsequent cooling
Notice bibliographique
Résumé
Modified mold steels have recently gained attention as a novel approach in steel grades due to their high-performance applications. In this study, high-resolution dilatometry was used to study the isothermal bainitic transformation of a medium-carbon low-alloy steel after full austenitization at 900 ˚C, followed by austempering for 3 hours at temperatures ranging from 380 to 450 ˚C. The results showed that no bainitic phase transformation occurred at 450 ˚C, while an incomplete transformation was observed at all lower tested temperatures, and martensitic transformation occurred upon cooling at the final stage. Increasing the austempering temperature from 380 ˚C to 425 ˚C resulted in a lower volume fraction of bainite and a higher amount of martensite, whereas at 450 ˚C, a full lath martensite microstructure formed during final cooling. Electron backscatter diffraction (EBSD) and scanning electron microscopy (SEM) analyses revealed that increasing the isothermal holding temperature led to increased thickness of the bainitic blocks and a higher volume fraction of martensite. Vickers hardness increased from 412 to 500 HV between 380 and 450 ˚C holding temperatures. This increase was attributed to the phase volume fraction, the carbon content of martensite, and the thickness of bainitic ferrite blocks. Nanoindentation tests were conducted on different martensitic and bainitic regions to compare the influence of isothermal holding temperature on the characteristics of the phases. The results indicated that as the isothermal temperature increased, the carbon content of martensite decreased, leading to a reduction in the nanohardness of the martensitic regions from 8.3 GPa at 400 ˚C to 7.8 GPa at 425 ˚C and 6.9 GPa at 450 ˚C. Furthermore, the average block thickness of bainitic ferrite increased from 0.71 μm to 1.98 μm as the isothermal temperature was raised from 380 ˚C to 425 ˚C, resulting in a decrease in nanohardness from 6.3 to 5.4 GPa. These findings are interpreted in terms of the evolution of bainitic block thickness and the carbon content of martensite at different austempering temperatures, as well as their impact on the hardness of the phases.
Récupéré en direct depuis OpenAlex et désinversé. Les résumés ne sont pas conservés dans cette base de données : les index inversés représentent 8,6 Go des 9,3 Go de texte de la base, et le serveur dispose de 13 Go libres.
Comment cette classification a été obtenuedéplier
Prédiction machine sur la base complète
Imitation des enseignantsNi prévalence calibrée, ni vérité terrain. Validation humaine à venir. Le volet Gemma est une étiquette directe du modèle pour chaque travail de la base, lue sur la notice réduite au titre. Le volet Codex est un classifieur appris des 10 348 étiquettes directes de Codex et calibré sur les taux pondérés de l'échantillon; les champs sans appui suffisant ne portent aucun appel Codex. Le mode candidate est l'union des deux volets; le consensus est leur intersection. Ces sorties portent le statut machine_predicted_unvalidated et ne sont pas des étiquettes humaines.
Scores du classifieur distillé par catégorie (deux têtes)
| Catégorie | Codex | Gemma |
|---|---|---|
| Métarecherche | 0,000 | 0,001 |
| Méta-épidémiologie (sens strict) | 0,000 | 0,000 |
| Méta-épidémiologie (sens large) | 0,000 | 0,000 |
| Bibliométrie | 0,000 | 0,000 |
| Études des sciences et des technologies | 0,000 | 0,000 |
| Communication savante | 0,000 | 0,000 |
| Science ouverte | 0,000 | 0,000 |
| Intégrité de la recherche | 0,000 | 0,000 |
| Charge utile insuffisante (le modèle a refusé de juger) | 0,002 | 0,000 |
Scores machine (provisoires)
Les deux têtes enseignantes du modèle étudiant, lues sur ce travail. Un score ordonne la base pour la relecture; il n'affirme jamais une catégorie, et le statut de validation accompagne chaque rangée tel quel.
Scores de référence d'un modèle non mature (critères de maturité non atteints, 7 itérations). Un score ordonne; il n'affirme jamais une catégorie.
score_only:v0-immature-baseline · tel quel depuis la passe de notation : score_only signifie que le nombre peut ordonner les travaux, et qu'aucune étiquette de catégorie n'en découleClassification
machine, non validéePrédiction automatique; un appel candidat d’une seule source (Gemma direct ou Codex distillé), pas un consensus.
Le détail, modèle par modèle et score par score, se trouve en fin de page sous « Comment cette classification a été obtenue ».