In-Line Single-Mode Optical Fiber Interferometric Refractive Index Sensors
Bibliographic record
Abstract
Novel in-line single-mode fiber interferometers- Mach-Zehnder and Michelson-have been designed, fabricated, and tested as refractive index (RI) sensors. Abrupt tapers and connector-offset attenuators are proposed as alternatives to long period gratings (LPGs) as mode-coupling mechanisms to transfer optical power between core and cladding modes in optical fiber. The coupling coefficients between core and cladding modes in the proposed designs were calculated using numerical packages and the devices were subsequently implemented using commercially available fusion splicer. For an abrupt taper, most coupling occurs between the LP01and LP0mmodes, with the first ten modes accounting for 98% of the incident mode energy. For a connector-offset attenuator, coupling mainly occurs between the LP01and LP1mmodes, with the first ten LP0mmodes and first ten LP1mmodes accounting for 92% of the incident mode energy. In particular, in the case of connector-offset attenuator, the relative direction between the two connector-offsets was found to be very important to the interference performance. Interference patterns were realized in simulation for the interferometers using both mode-coupling mechanisms. Three interferometers were realized in the experiment using abrupt taper-Mach-Zehnder and Michelson-and connector-offset attenuator-Michelson. They showed large extinction ratios (up to 23 dB) and small insertion losses (smaller than 3 dB). Although it is difficult to make Mach-Zehnder interferometers using connector-offset attenuator pair due to the lack of polarization control in the fusion splicer, some evidence of constructive interference was observed in the experiment. The interferometers were tested as RI sensors using the maximum attenuation wavelength shift. Given that the minimum resolution of optical spectrum analyzer is 10 pm, ~ 10-4difference of RI can be detected by the proposed interferometric sensors, providing similar performance as LPG-based interferometers at a lower cost and simpler fabrication process.
Fetched live from OpenAlex and de-inverted. Abstracts are not stored in this database: the inverted indexes are 8.6 GB of the frame’s 9.3 GB of text, and the host has 13 GB free.
How this classification was reachedexpand
Full frame machine prediction
Teacher imitationNot calibrated prevalence, not ground truth. Human validation pending. The Gemma side is a direct model label for every work in the frame, read from the title-only record. The Codex side is a classifier learned from the 10,348 direct Codex labels and calibrated to design-weighted sample rates; fields without enough sample support carry no Codex call. Candidate is the union of the two sides; consensus is their intersection. These outputs are machine_predicted_unvalidated and are not human labels.
Distilled classifier scores by category (both heads)
| Category | Codex | Gemma |
|---|---|---|
| Metaresearch | 0.000 | 0.000 |
| Meta-epidemiology (narrow) | 0.001 | 0.000 |
| Meta-epidemiology (broad) | 0.000 | 0.000 |
| Bibliometrics | 0.000 | 0.000 |
| Science and technology studies | 0.000 | 0.000 |
| Scholarly communication | 0.000 | 0.001 |
| Open science | 0.001 | 0.000 |
| Research integrity | 0.000 | 0.000 |
| Insufficient payload (model declined to judge) | 0.001 | 0.000 |
Machine scores (provisional)
The two teacher heads of the student model, read on this work. A score orders the frame for review; it never asserts a category, and the validation status ships verbatim with every row.
Baseline scores from an immature model (maturity gate not passed, 7 training rounds). Scores rank; they never assert a category.
score_only:v0-immature-baseline · verbatim from the scoring run: score_only means the number may rank works, and no category label ships from itClassification
machine, unvalidatedMachine predicted; a candidate call from one source (direct Gemma or distilled Codex), not a consensus.
How this classification was reached, model by model and score by score, is at the end of the page under "How this classification was reached".