Refinement of the Hot-Mix Asphalt Ignition Method for High-Loss Aggregates
Why this work is in the frame
A frame that forgets how it found something cannot be audited. These are the routes that admitted this work.
Bibliographic record
Abstract
Four methodologies for determining the asphalt content of mixtures containing high-loss aggregates in the ignition furnace were evaluated: the standard method using the Thermolyne furnace (control), the Troxler NTO infrared furnace, the Ontario method, and a Tempyrox glass-cleaning oven. Six aggregate sources with high ignition furnace aggregate corrections were obtained from around the country: four dolomites, a basalt, and a serpentine/chlorite. Calibration factors were determined for each method at optimum asphalt content. Additional samples were then tested at optimum plus 0.5% asphalt content, and the measured asphalt content was calculated by using the correction factor determined for that method and aggregate source. The Tempyrox Pyro-Clean furnace, commonly used for cleaning laboratory glassware, produced the lowest aggregate correction factors. The standard method and the Ontario method, both using the Thermolyne ignition furnace, produced the smallest bias or error in measured asphalt content. The standard deviation of the corrected asphalt contents for these high-loss sources was higher than the within-laboratory standard deviation reported for AASHTO T308. The only exception was the Alabama source using the standard method. The Ontario method and Tempyrox oven generally reduced the variability of asphalt content measurements for high-loss aggregates. None of the methods evaluated statistically reduced aggregate breakdown on the nominal maximum aggregate size and 4.75-mm sieves. The Ontario method significantly reduced, but did not eliminate, aggregate breakdown on the 0.075-mm sieve. The Ontario method is the best method for immediate implementation for determining the asphalt content by the ignition method for high-loss aggregates.
Fetched live from OpenAlex and de-inverted. Abstracts are not stored in this database: the inverted indexes are 8.6 GB of the frame’s 9.3 GB of text, and the host has 13 GB free.
Full frame distilled prediction
Teacher imitationNot calibrated prevalence, not ground truth. Human validation pending. Learned from the 10,348 direct Codex labels and 10,348 direct Gemma labels. Candidate is the union of thresholded teacher heads; consensus is their intersection. These outputs are machine_predicted_unvalidated and are not human labels or direct frontier model labels.
Codex and Gemma teacher scores by category
| Category | Codex | Gemma |
|---|---|---|
| Metaresearch | 0.011 | 0.000 |
| Meta-epidemiology (narrow) | 0.000 | 0.000 |
| Meta-epidemiology (broad) | 0.000 | 0.000 |
| Bibliometrics | 0.001 | 0.002 |
| Science and technology studies | 0.001 | 0.001 |
| Scholarly communication | 0.000 | 0.001 |
| Open science | 0.002 | 0.000 |
| Research integrity | 0.000 | 0.001 |
| Insufficient payload (model declined to judge) | 0.001 | 0.000 |
Machine scores (provisional)
The two teacher heads of the student model, read on this work. A score orders the frame for review; it never asserts a category, and the validation status ships verbatim with every row.
Baseline scores from an immature model (maturity gate not passed, 7 training rounds). Scores rank; they never assert a category.
score_only:v0-immature-baseline · verbatim from the scoring run: score_only means the number may rank works, and no category label ships from it